Marantz NA6005 - Manual (Page 60)

Pairing with the Pairing Mode
Pair a Bluetooth device with this unit.
1
Press SRCH when the input source is “Bluetooth”.
The device will go into the pairing mode.
0
Either press and hold Bluetooth for 3 seconds, or switch the input
source to “Bluetooth” and then press and hold INPUT on this unit
for more than 3 seconds to switch to pairing mode.
2
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
At the end of the pairing, the device name appears on the display of
this unit.
0 When a number appears on the display of this unit, check that it is the same
number as that shown on the screen of the Bluetooth device and then select “Pair”
for both the Bluetooth device and the unit.
0 Enter “0000” when the password is requested on the screen of the Bluetooth
device.
Contents Connections Playback Settings Tips Appendix
60
Front panel Rear panel
Remote control
unit
Index