Marantz NA6005 - Manual (Page 87)

General
Make various other settings.
Audio Out
You can set whether to “Fixed” or “Variable” the analog audio output level.
Fixed
(Default):
Fixes the analog audio output level (0 dB).
Variable:
You can adjust the analog audio output level using
the VOLUME df buttons on the remote control.
0 The remote control needs to be set in order to adjust the analog audio output level.
(v p. 100)
0 When the analog output level is adjusted, the headphone volume also changes.
When using the headphones, adjust the volume to a suitable level by also using
the headphone volume control knob.
0 When “Variable” is selected, the analog audio output level can be adjusted to ---
dB (minimum) and between the range from –99 dB – 0 dB (Default: –40 dB).
NOTE
0 Note that the analog audio output level changes to the maximum (0 dB) when the
analog audio output setting is changed from “Variable” to “Fixed”.
0 Before changing the settings, turn the volume of the amp connected to the analog
audio output terminals (AUDIO OUT) and headphones connected to the unit to the
minimum volume.
Volume Limit
This sets the maximum analog audio output level that can be used when
the analog audio output setting is set to variable.
0 dB:
Set the maximum analog audio output level to 0
dB.
–10 dB
(Default):
Set the maximum analog audio output level to -10
dB.
–20 dB:
Set the maximum analog audio output level to –20
dB.
This can be set when the “Audio Out” setting is set to “Variable”.
Contents Connections Playback Settings Tips Appendix
87
Front panel Rear panel
Remote control
unit
Index