Marantz SA8005 - Manual (Page 49)

49
Appendix Tips Settings Connections Contents
Front panel Display Rear panel Index Remote
Playback
NOTE
• The dedicated driver must be installed in the computer before this unit is connected
to a computer. Operation will not occur correctly if connected to the computer
before the dedicated driver has been installed. Moreover, if the computer is
running Windows XP as its OS, the computer’s speed will decrease significantly,
and a computer restart may be required.
• Operation may fail in some computer hardware and software configurations.
w Click the “Advanced” tab.
e Select the sampling rate and bit rate to be applied to the D/A
converter.
• It is recommended that “24 bit, 192000 Hz (Studio Quality)”
is selected.
r Click “Apply”.
t Click “Test”.
• Check that audio from this unit is output from the computer.
Apply Cancel
Test
OK
2 channel, 24 bit, 192000 Hｚ (Studio Quality)
Give exclusive mode applications priority
Default Format
Select the sample rate and bit depth to be used when running
in shared mode.
Digital Audio Interface Properties
Allow applications to take exclusive control of this device
Restore Defaults
General Supported Formats Levels Advanced
2 channel, 24 bit, 44100 Hｚ (Studio Quality)
2 channel, 24 bit, 48000 Hｚ (Studio Quality)
2 channel, 24 bit, 96000 Hｚ (Studio Quality)
2 channel, 24 bit, 192000 Hｚ (Studio Quality)
w
t
e
r