Marantz SA8005 - Manual (Page 56)

56
Appendix Tips Playback Connections Contents
Front panel Display Rear panel Index Remote
Settings
Vol.Limit
This sets the maximum analog audio output level that can be used when
the analog audio output setting is set to variable.
0 dB : Set the maximum analog audio output level to 0 dB.
–10 dB (Default) : Set the maximum analog audio output level to –10 dB.
–20 dB : Set the maximum analog audio output level to –20 dB.
%
• This can be set when the “Audio Out” (vpage 55) setting is set to “Variable”.
Auto Stnby
A standby status is established at the unit if a stopped status or a no
external input signal status continues for 30 minutes or more.
On : Enable Auto Standby mode.
Off (Default) : Disable Auto Standby mode.
%
• When iPod is being charged, this unit enters the power standby mode after
charging.