Marantz SA8005 - Manual (Page 60)

60
Appendix Settings Playback Connections Contents
Front panel Display Rear panel Index Remote
Tips
Troubleshooting
If a problem should arise, first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other devices operating properly?
If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction.
In this case, disconnect the power immediately and contact your store of purchase.
2 Power does not turn on / Power is turned off
Symptom Cause / Solution Page
Power is not turned on. • Check whether the power plug is correctly inserted into the power outlet.
• This unit is in standby mode. Press X on the unit or POWER X on the remote control.
26
28
Power automatically turns off. • The Auto Standby mode is set. When Auto Standby mode is set to On, if the unit remains
in the stopped state and no operations are performed or if there are no input signals for
approximately 30 minutes, the unit automatically switches to standby mode. To disable Auto
Standby mode, set “Auto Stnby” on the menu to “Off”.
56