Marantz CD6003 - Manual (Page 17)

11
NAMES AND FUNCTIONS
BASIC
CONNECTIONS
BASIC
OPERA
TIONS
ADV
ANCED
CONNECTIONS
ADV
ANCED
OPERA
TIONS
TROUBLESHOOTING
OTHERS
ADV
ANCED
OPERA
TIONS
ENGLISH
2. Press the numeric buttons on the remote
controller the tracks can also be selected
using the
4 and ¢ buttons on the
remote controller or 4/1 and ¡/¢
buttons on the unit. To select track number
10 or above, use the numeric buttons to
select the higher digit fi rst and then select
the lower digit.
DISPLAY EXAMPLE: WHEN TRACK 2 HAS BEEN
SELECTED
Flashes
3.
Repeat step 2. to program the desired
tracks in sequence. At each step of the
programming, the number of tracks
programmed and their total time appear
on the main display. Up to 30 tracks can be
programmed.
4. Once all the tracks have been programmed,
press the 7 button on the unit or remote
controller or press the PROGRAM button
on the remote controller.
The PROG indicator stops flashing and
lights up instead, and the program is
entered.
5. Press the 3 button on the unit or
remote controller. Play now starts in the
programmed sequence.
Program play will start even when step 4. is
omitted.
DELETE PROGRAM PLAY
(PLAY WITH UNDESIRED
TRACKS SKIPPED)
This function makes it possible to skip those tracks
that you do not want to hear during CD play. Up to
30 tracks can be deleted from the program.
2. 4. 3.
1. 3.
1.
4.
2.
3.
2.
1.
During stop, press the PROGRAM button
on the remote controller, and then press
the CANCEL button.
“Delete Prog.” appears for an instant on
the main display.
Flashes
ADVANCED OPERATIONS –AUDIO CD–
PROGRAM PLAY (PLAYING TRACKS
IN THE PREFERRED SEQUENCE)
The order in which the CD tracks are played can
be rearranged into the sequence desired. Up to 30
tracks can be programmed.
2. 5. 4.
4. 1.
5.
2.
4.
2.
1. During stop, press the PROGRAM button
on the remote controller.
“Program” appears for an instant on the
main display.
Flashes
The PROG indicator flashes, and the
program mode is established.
Flashes
The total number of CD tracks and the total
play time appear on the main display, the
PROG indicator flashes, and the delete
program mode is established.
Flashes
2. Press the numeric buttons on the remote
controller that you do not want to hear (the
track can also be selected using the
4
and ¢ buttons on the remote controller or
4/1 and ¡/¢ buttons on the unit).
DISPLAY EXAMPLE: WHEN TRACK 2 HAS BEEN
SELECTED
Flashes
3.
Repeat step 2. , and upon completion of
the programming, press the 7 button
on the unit or remote controller or press
the PROGRAM button on the remote
controller.
The PROG indicator in the display stops
flashing and lights up instead, and the
delete program is entered. Up to 30 tracks
can be deleted from the program.
4. Press the 3 button on the unit or remote
controller. The CD is now played but with
the deleted tracks skipped.
CD6003_N_01_Eng.indd 11 CD6003_N_01_Eng.indd 11 09.5.29 4:00:15 PM 09.5.29 4:00:15 PM