Marantz CD6003 - Manual (Page 19)

13
NAMES AND FUNCTIONS
BASIC
CONNECTIONS
BASIC
OPERA
TIONS
ADV
ANCED
CONNECTIONS
ADV
ANCED
OPERA
TIONS
TROUBLESHOOTING
OTHERS
ADV
ANCED
OPERA
TIONS
ENGLISH
ADVANCED OPERATIONS –AUDIO CD–
IN THE STOP MODE
Each time the TEXT button on the remote controller
is pressed, the information items are displayed
in the following sequence. When the
3 button
is pressed while “-- Title” is displayed, the track
concerned starts playing.
Time display
Album Title
Album Artist
-- Title (title of track --)
PITCH CONTROL
(CHANGING THE PLAY SPEED)
During stop, press the SOUND MODE button on
the remote controller several times until “Audio EX
OFF” appears on the display.
SOUND MODE
RESET
+
–
The play speed (pitch) can be changed across a
±12 step.
Note
Digital signals are not output during pitch control.
(Signals are output when the pitch control is set
to 0).
INCREASING THE PLAY SPEED
Press the PITCH+ button on the remote controller.
Each time the + button is pressed, the playback
speed will increase (max. +12).
REDUCING THE PLAY SPEED
Press the PITCH- button on the remote controller.
Each time the - button is pressed, the playback
speed will decrease (min. -12).
RETURNING PLAY TO THE NORMAL
SPEED
Press the RESET button on the remote controller.
“Pitch: 0” appears on the main display.
If the RESET button on the remote controller is
pressed again, play returns to the previous speed
setting.
DIGITAL OUTPUT OFF
If digital output is not to be used, turn digital output
OFF, and you can enjoy higher-quality sound.
SETTING DIGITAL OUTPUT ON OR OFF
2. 3.
2. 3.
1. 4.
1. During stop, press the MENU button on the
remote controller.
2. Use the 4 or ¢ button to display
“DigitalOut=>” on the display, then
press the ENTER button on the remote
controller.
3.
To turn on the digital audio output, display
“1 On”, using the 4 or ¢ button, then
press the ENTER button on the remote
controller.
To turn off the digital audio output, display
“2 Off”, using the 4 or ¢ button, then
press the ENTER button on the remote
controller. “D OFF” will be lit on the display
when the digital output is set to OFF.
(At the time of purchase, this is set to “1
On”.)
4. Press the MENU button on the remote
controller to complete the setting.
AUDIO EX SELECTION
For higher-quality sound, select the Audio EX
setting, referring the table below.
Audio EX changes as shown below each time the
SOUND MODE button on the remote controller is
pressed during stop.
Audio EX OFF
Audio EX 1
Audio EX 2
(When fi rst purchased)
AUDIO EX OFF
• Pitch control
Usable
• Digital output
Yes (*1) (when the pitch control setting is 0)
• Display
Yes
AUDIO EX 1
When fi rst purchased. Audio EX 1 offers better
sound.
• Pitch control
Not usable
• Digital output
Yes (*1)
• Display
Yes
AUDIO EX 2
Audio EX 2 offers best sound from analog outputs.
• Pitch control
Not usable
• Digital output
No
• Display
No (during play) (*2)
(*1) Setting of Digital Out on the MENU (see page
13) takes priority.
(*2) Pressing the DISPLAY button on the remote
controller shows the display for three
seconds.
CD6003_N_01_Eng.indd 13 CD6003_N_01_Eng.indd 13 09.5.29 4:00:16 PM 09.5.29 4:00:16 PM