Denon ADV-1000 - Manual (Page 11)

11
ENGLISH
1
4
2
3
IN
V.AUX
OUT IN
TV/DBS
DIGITAL(OPTICAL)
OUT
CR
IN OUT IN IN
TV/DBS
IN
V.AUX VCR
MON.OUT
VIDEO
R
L
IN OUT IN IN IN OUT
V.AUX TV/DBS VCR CDR/
TAPE
AM
FM COAX. 75
LOOP ANT.
AUDIO
(4) Connecting the antenna terminals
DIRECTION OF
BROADCASTING
STATION
75 Ω /ohms
COAXIAL
CABLE
FM ANTENNA
FM INDOOR ANTENNA
(Supplied)
AM LOOP ANTENNA
(Supplied)
AM OUTDOOR
ANTENNA
GROUND
AM loop antenna assembly
Connect to the AM
antenna terminals.
Remove the vinyl tie
and take out the
connection line.
Bend in the reverse
direction.
a. With the antenna
on top any stable
surface.
b. With the antenna
attached to a wall.
Mount
Installation hole Mount on wall, etc.
Connection of AM antennas
1. Push the lever. 2. Insert the conductor. 3. Return the lever.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to
Article 820-40 of the NEC which provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as
practical.
NOTES:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the AM loop
antenna.
• Make sure AM loop antenna lead terminals do not touch metal parts of the
panel.
FM ANTENNA
ADAPTER
(Option)
• An F-type FM antenna cable plug can be connected directly.
• If the FM antenna cable’s plug is not of the F-type, connect using the F-type antenna adapter (Option).