Denon ADV-1000 - Manual (Page 78)

78
ENGLISH
2 When “TV TYPE” is selected:
• MULTI
Select this when your TV is compatible with both the
NTSC and PAL formats.
NTSC signals are output from the video output jacks
when discs recorded in NTSC format are played, and
PAL signals are output from the video output jacks
when discs recorded in PAL format are played.
• NTSC (Factory default)
Select this when your TV’s video format is NTSC.
If NTSC is selected, output format is fixed to NTSC.
• PAL
Select this when your TV’s video format is PAL.
If PAL is selected, output format is fixed to PAL.
To exit the TV type mode
Press the ENTER button, you can go back to the
previous screen.
2 When “VIDEO OUT” is selected: (NOTE)
• PROGRESSIVE (Factory default)
Select this when using the ADV-1000 connected to a
progressive type TV.
• INTERLACED
Select this when using the ADV-1000 connected to
an interlace type TV.
To exit the video out mode
Press the ENTER button, you can go back to the
previous screen.
4
B
TV V TYPE
MUL T I
PAL
NTSC
DEC I S ION : ENTER BUTTON SEL ECT :
TV TYP E
Remote control unit
Remote control unit
ENTER
d
B
V I DEO O OUT PROGRESSIVE
I NTER L ACED
DEC I S ION : ENTER BUTTON SEL ECT :
V I DEO OUT
Remote control unit
Remote control unit
ENTER
d
NOTE:
• For the component output only, it is possible to switch between interlace image output and progressive image output. It is not possible to
specify progressive image output for the Video output connectors or S-Video output connector.