Microcom 470 - Manual (Page 97)

))))))))))))))))))))))))))))))))))))))))))))
470 Operators Manual 89
CHAPTER 11: OPTIONS
The 470 printer has many options available to enhance the performance of the printer. Contact
your sales representative for more information on these features.
11.1MICROCOM GRAPHICS CONVERSION UTILITIES
PCX2470.EXE
This PC software program decodes PCX files and converts them to the Microcom 470 format
which can be stored in the 470 printer. It supports all 470 graphics features. See chapter 4.5.3
and 6 for more information about printing graphic images.
PCX2BIT.EXE
This PC software program decodes PCX files and converts them to a bitmap that can be
directly downloaded and printed on the 470 printer. See chapter 4.5.3 and 6 for more
information about printing graphic images.
11.2 MICROCOM DOWNLOADABLE FONT UTILITY
JET2470.EXE
This PC software program converts LaserJet II™ compatible fonts to the Microcom
MSF format. Converted fonts may be stored in volatile or non-volatile memory for future
use. See chapter 9 for more information on downloadable fonts.
11.3 ADDITIONAL DOWNLOADABLE FONTS
Microcom caries a full line of typefaces which can easily be downloaded by the user.
Up to 8 fonts may be stored in permanent battery backed memory and up to 16 may be
stored in temporary memory. Contact Microcom for a complete list of available
typefaces and point sizes.
11.4 WYSIWYG SOFTWARE PACKAGES
WYSIWYG Software packages, through Microcom, offer a WYSIWYG (What You See
Is What You Get) label design software package.
11.5 CLEANING KIT
An approved cleaning kit is offered for the 470 printer. A Microcom cleaning kit must be
purchased to validate warranty. It is suggested the printer be cleaned once every two
weeks, every 5,000 labels, or whenever label stock is replaced.