MicroLinks UM12 - user manual - Manual (Page 64)

Microscope Software manual http://www.ViTiny.com
64
Copyright © 2008-2014 MicroLinks Technology Corp.
Fig 5-66 Multi-lines measurement
(4) 2 Points Circle: Measure the round object can use . Firstly choose Fig.5-63
Scale information setting dialog. To point any dot on the circle, pressing the left
button of the mouse and drag the line to another point on the circle. It should
automatically calculate C: Circumference, A: Area, R: Radius, D: Diameter. See
1
st
circle: C=2.276mm, 2
nd
circle: =0.412mm
2,
3
rd
circle R=0.716mm, and 4
th
circle
D=1.467mm as Fig. 5-67.
Fig 5-67 2 Points Circle Measurement
(5) 3 Points Circle: See an arc or a circle shows on the observation only and need
measure the circle, it can use . Firstly choose Fig.5-68 Scale information
setting dialog. To point any point on the edge of an arc, draw a line to second
point, then drag the line to the third point on the same arc, to automatically
calculate a correct circle. The said 3 points on the arc to be necessary a
triangle, See Fig 5-66, the figure can be measure as 2 Point Circle. 1
st
circle:
Circumferences C=2.409mm, 2
nd
circle Area A=0.450 mm
2
, 3
rd
circle:
R=0.727mm, 4
th
circle: D=1.480mm.