Light mode – MicroLinks UM12 - user manual User Manual
Page 74
Microscope Software manual http://www.ViTiny.com
74
Copyright © 2008-2014 MicroLinks Technology Corp.
(4) Increase
：increase the brightness. Fast key “→: or “Page Up”
5.5.8
Light mode「
」
Based on the objects, there are options for Light mode. Different Light mode can
be choose from direct light or side light. Side light gives stereo image effect.
(1) LED All on
: All LEDs are light on. When enable Far Distance control mode,
Light mode default setting is in LED All on mode.
(2) Mode 1 : Suitable for higher working distance.
(3) Mode 2 : Suitable for lower working distance.
(4) Mode 3 : Suitable for high working distance.
(5) Mode 4 : Suitable for middle-high working distance.
(6) Mode 5 : Suitable for low working distance.
(7) Auto
: Auto change the light mode depends on the working distance.
Fig. 5-85 Drop down menu for Light mode.