Enable far distant control mode, Disable far distance control mode, Snapshot – MicroLinks UM12 - user manual User Manual
Page 71
Microscope Software manual http://www.ViTiny.com
71
Copyright © 2008-2014 MicroLinks Technology Corp.
5.5.1
Enable Far Distant Control mode ”
”
Click the icon
, to start using far distance control function. When connect this
control mode, it allows to operate the microscope without touching the device. Use this
mode to do snapshot, zooming in/out…etc. Fast key「C」
。
Fig 5-82 far distance control mode toolbar
5.5.2
Disable Far Distance Control Mode ”
”
Click the icon
in Fig 5-78, to end up using far distance control mode, to operate
microscope device function manually. Fast key「C」
。
5.5.3
Snapshot “
”
Snapshot button is to take 5MP photo. When press “snapshot”, the live preview
image will save for temporally and show on the right window, then press “Save” button to save the
image. Fast key: “S” or “space”