NCast Telepresenter M4 - Manual (Page 17)

NCast Telepresenter Reference Manual
• Reboot – Shuts down and then restarts the unit. This operation may be needed to clear problems
after a power brownout or other unexpected glitch.
• Factory Defaults – All operating parameters are reset to the Telepresenter’s initial factory
configuration. Nothing is saved and the reset is irreversible.
• Export Settings/Import Settings – Export or Import ALL configuration settings for this unit
• Install License/Remove License – Install license keys for additional purchased software options
3.2. P
ASSWORDS
The Passwords page provides for entry of four different password types to control access to the
Telepresenter.
3.2.1. Admin password
The Admin password grants rights to all configuration and setup options for the Telepresenter. This password
should be chosen carefully and with security in mind. Avoid use of common names, dictionary words and the
like. A randomly chosen string greater than 8 characters in length is suggested.
3.2.2. Coordinator password
The Coordinator password allows the Conference Coordinator to control the conference session and to pass
control to the participating units. The Coordinator also has access to Archive files.
3.2.3. Viewer passwords
The View page allows desktop or laptop users to access the live media streams being encoded by the
Telepresenter. This access may or may not be restricted, depending on the content and needs of the
installation and/or organization. If the “Verify viewer password” checkbox is enabled, then access is restricted
and a viewer needs to enter a password to see the media stream.
There is provision for four different viewer names and passwords.
3.2.4. HTTP API password
NCast Corporation Revision 2.2
Page 17