Sources settings – NCast Telepresenter M4 User Manual

Page 70

Advertising
background image

NCast Telepresenter Reference Manual

6. Sources Page

6.1. S

OURCES

S

ETTINGS

The Sources Page controls what graphics/video or audio inputs will be sent to the compression engines.

6.1.1. Main input

The user may select one of the following graphics/video sources for capture as the primary image:

Graphics/Video

Input

VGA

RGB analog signals from
the 15-pin VGA connector

DVI

Digital RGB signals from
the DVI connector

S-Video (Y/C)

NTSC or PAL video from
the auxiliary S-video pin
connector

Composite

NTSC or PAL video from
the composite (BNC)
connector

The DVI input is compatible with the DVI-D 1.0 specification and the VESA DCC/EDID 1.3 specification.
Analog input on the DVI cable is not supported. The required interface cable is a DVI-D (Single Link). A DVI-
D (Dual Link) cable is also acceptable. The following cables will not connect: DVI-I (Single Link), DVI-I (Dual
Link) and DVI-A.

NCast Corporation

Revision 2.2

Page 70

Advertising
This manual is related to the following products: