Nevion HD-TD-10GMX-6 - Manual (Page 5)

HD-TD-10GMX-6 / HD-TD-10GDX-6 Rev. B
nevion.com | 5
2
Connections
Figure 1: The backplane, HD-TD-10G-C1
The backplane HD-TD-10G-C1 is used for both the mux and the de-mux modules. All
external connections are made via the backplane.
The backplane occupies two slots in the Flashlink frame, and the module will then go in the
rightmost of the two slots.
Function Label Connector type
HD/SD-SDI channel 1 Ch1 BNC
HD/SD-SDI channel 2 Ch2 BNC
HD/SD-SDI channel 3 Ch3 BNC
HD/SD-SDI channel 4 Ch4 BNC
HD/SD-SDI channel 5 Ch5 BNC
HD/SD-SDI channel 6 Ch6 BNC
SD-SDI channel 7 Ch7 BNC
SD-SDI channel 8 Ch8 BNC
TX optical port w/cover OPT1 ---
RX optical port w/cover OPT2 ---
GPI outputs GPIO TP45, pin 2 (card status, open when
alarm)
TP45, pin 3 (channel 1-4 status,
closed when alarm),
TP45, pin 6 (channel 5-8 status,
closed when alarm)
GPI inputs GPIO TP45, pin 1 (laser disable, active
low)
GPI GND GPIO TP45, pin 8
--- Ethernet TP45
Table 1: Connector functions