Nevion SDI-TD-3GMX-5 - Manual (Page 28)

HD-TD-3GMX-2 / HD-TD-3GDX-2 and SDI-TD-3GMX-5 / SDI-TD-3GDX-5 Rev. F
nevion.com | 28
The rear end of the boards (with the connector that mates to the backplane) is towards the
right side of the board. The boards must be mounted in a Flashlink FR-2RU-10-2 frame with
dedicated backplanes. Avoid inserting the HD-TD-3GMX-2 or the HD-TD-3GDX-2 board
into a non-compatible backplane, as this may cause electrical and/or mechanical damage
to the main boards and/or the backplane.
Figure 13: MUX main board overview
Figure 14: DMUX main board overview