Nevion FRS-HD-XMUX4 - Manual (Page 9)

FRS-HD-XMUX4 Rev. C
nevion.com | 9
3.1.3 DIP switch functions
Note that the left DIP switch of the horizontal DIP package is number 1.
The top DIP switch of the vertical DIP package is number 17.
Switch # Function name Function DIPs Comment
1 AES1 dir Off = input
On = output AES 1 input or output, if
AES1 is input, DIP 2-4
routes GROUP 1.
2-4 AES1/GRP 1
routing DIP
234 Group 1
Embeddin
g AES1
output
Deembed
ding Routing matrix to AES1 or
GROUP 1
000 Disable Group 1
ch 1&2
001 Group 1 Group 1
ch 3&4
010 Group 2 Group 2
ch 1&2
011 Group 3 Group 2
ch 3&4
100 Group 4 Group 3
ch 1&2
101 AES1&2 Group 3
ch 3&4
110 AES3&4 Group 4
ch 1&2
111 Generator Group 4
ch 3&4
5 AES2 dir Off = input
On = output Aes 2 input or output
6-8 AES2/GRP2 See table for AES1/GRP1 Routing Matrix to AES2 or
GROUP 2
9 AES3 dir Off = input
On = output AES 3 in or out
10-12 AES3/GRP 3 See table for AES1/GRP1 Routing AES3 / GROUP 3
13 AES4 dir Off = input
On = output AES 4 in or out
14-16 AES4/GRP 4 See table for AES1/GRP1 Routing matrix AES4 /
GROUP 4
X- Y Frame delay DIP[1 2] = [Off Off ] => 0 frms
DIP[1 2] = [Off Off ] => 1 frms
DIP[1 2] = [Off On ] => 2 frms
DIP[1 2] = [Off On ] => 3 frms
With a sync-input present,
this sets the minimum
frames delay.
Without a sync-input
present this sets the no. of
frames delay relative to the
input.
ADLY Audio follows
video delay On: De-embedded audio
follows video. DIP 17-18 is
used
Off: De-embedded audio will
not use Frame delay from dip
17-18
If on, de-embedded audio
delay will follow video delay