Nevion VikinX Sublime series Rev.G - Manual (Page 19)

VikinX Sublime Optical Routers Rev. G
nevion.com | 19
connected to IP, or RS-232; and the rest of the stack interconnected with NCB
connections.
This protocol option is only used on 16x2 routers; but should be used on all
16x2 routers in the application.
Use your Nevion Configurator to verify the HW revision of your Sublime unit:
Figure 2: HW verification in Nevion Configurator.
Right-click the column headers and select the appropriate column to be shown,
if you don’t see the appropriate column in your default display.
For further information about FW releases, please go to the Nevion web site to download,
or check available FW releases:
www.nevion.com .
3.7 Configuring Input options
This configuration is done in the Nevion Configurator.
3.7.1 Input EQ
It is possible to enable, or bypass, Input EQ for each router input separately. Default is
Input EQ enabled.