Nevion VikinX Sublime series Rev.G - Manual (Page 8)

VikinX Sublime Optical Routers Rev. G
nevion.com | 8
2.3 Control
Standard Features:
Serial port: RS-232 for protocol conversion, to VikinX compact control
protocol, or to third party protocols.
Connector: DE9, D-sub 9-pin female.
NCB ports: For integration with VikinX compact router configuration.
Connectors (2): RJ45 (1 In / 1 Out)
Ethernet port: 10/100BaseT Ethernet bus for external router control.
Connector: RJ45.
Synchronization: - Analog Black&Burst, looped. Both PAL and NTSC
supported.
- Tri-Level, Looped. For HD signal formats only.
- Distribution of synchronization signals between
several routers.
Connector(s): BNC.
Optional Features:
Control Panel:
- Optional, built-in control panel available.
- External control panels available.
2.4 3G/HD -SDI specifications
Supported formats:
Broadcast:
- 270Mbps
– 2.97Gbps;
- 2K, 2048x1556/23.98 and 24.
Supported standards:
SD-SDI, 270Mbps:
SMPTE 259M.
HD-SDI, 1.485Gbps: SMPTE 292-2008.
3G-SDI, 2.97Gbps: SMPTE 424M.
DVB-ASI: EN50083-9.
Fiber transmission: SMPTE 297-2006.
Optical signal inputs:
Optical Interface:
Nevion dual receiver SFP. See separated SFP datasheet
for specification
Optical signal outputs:
Optical Interface:
Nevion dual transmitter SFP. See separated SFP
datasheet for specification
Electrical signal inputs:
Connectors:
BNC, IEC 61169-8.
Impedance: 75 Ohm.
Return loss: - > 15dB (5MHz-1.485Ghz);
- > 10dB (1.5GHz – 3GHz).