Q45 vh45de infiniti installation – NIStune Type 2 V.1.6 User Manual

Page 17

Advertising
background image

Type 2 Hardware Installation Manual

Page 17 of 20

6. Q45 VH45DE Infiniti Installation


Please Refer to the Z32 300ZX Installation

Figure illustrates installation of installed 28 pin socket


Desolder the four pads next to the EPROM socket where marked with R/W

Where you have desoldered the four pads, solder in the supplied connector cable. The plastic
connector has a number '1' on it. This corresponds to pin R/W of the connector. Make sure that you
solder in the cable in the correct direction



Advertising