NIStune Type 2 V.1.6 - Manual (Page 6)

Type 2 Hardware Installation Manual Page 6 of 20
ECR32:
Connector Wire 1 - ECU throughhole 1 (Near socket)
Connector Wire 2 - ECU throughhole 2
Connector Wire 3 - ECU throughhole 3
Connector Wire 4 - ECU throughhole 4 (Near casing)
Next plug the Nistune Type 2 board into the EPROM socket. Be very careful all the pins on the
Nistune are straight and do not bend when pushing this into the socket. Plug the ECU connector
into the Nistune board