Niveo Professional NUPS22-1000U - Manual (Page 10)

7
Step 4
Step 5 Step 6
Remove the top cover of
battery box and replace the
inside batteries. After replacing the
batteries, put the battery
box back to original location
and screw it tightly. Re-connect the battery wires.
Step 7
Put the front panel back to the unit.
2-5 Battery Kit Assembly (option)
NOTICE: Please assemble battery kit first before installing it inside of UPS. Please select
correct battery kit procedure below to assemble it.
2-battery kit
Step 1: Remove adhesive tapes.
Step 2: Connect all battery terminals by
following below chart.
Step 3: Put assembled battery packs on
one side of plastic shells. Step 4: Cover the other side of plastic shell as
below chart. Then, battery kit is assembly well.
Tapes