Norsat ATOMControl - Manual (Page 13)

2 Monitoring Device Information
- 11 -
This chapter explains how to use ATOMControl to monitor identification,status, fault, and
temperature data for an ATOM Series BUC or SSPA.
Monitoring Device Information
The tabbed interface in the Controls section of the ATOMControl User Interface contains
four tabs: the Device Info tab, the Mute tab, the Attenuation tab, and the Custom
Commands tab. The Device Info tab can be used to monitor basic information for the
BUC or SSPA.
Figure 2: The Device Info Tab
If the Device Info tab is selected, device information monitoring will begin automatically
when the ATOMControl communication interface is successfully initialized. Monitoring is
automatically disabled when switching to a different tab, and is automatically enabled