Figure 9: mute state, 3 controlling atom devices – Norsat ATOMControl User Manual
Page 26
Advertising
- 24 -
Unmuting the Device
ATOM Series devices are unmuted only if nothing is causing them to be muted. The
parameters for hardware-based muting, fault-based muting, and software-based muting
must all be in a state that does not cause the BUC or SSPA to be muted in order for the
device to be in an unmuted state. ATOMControl displays the overall Mute State below
the Software-Based muting groupbox in the Mute tab in the Controls section of the User
Interface as shown in Figure 9 below:
Figure 9: Mute State
Advertising