OpenEye OE2-E480 - Manual (Page 52)

52
ACCESS REMOTE E-SERIES DVR
1. Open the Remote Software.
2. Click on the icon of the server as defined previously.
3. Enter the user name and password of an authorized remote user as defined in Network > Client Setup > User
Account on the Embedded system.
Note The User Name and Password are both case sensitive.
4. Click the Connect button.
CONNECTING TO MULTIPLE DVRS
Connect up to 4 E-Series DVRs using the Remote Software and easily switch between DVRs.
1. Configure all DVR connections as described above in Configuring a Remote PC.
2. After connecting to the first DVR, click CONNECT on the Display screen to open the Local Setup window.
3. Select a second pre-configured DVR and click Connect.
4. Use the drop-down menu in the lower left corner of the display screen to switch between the connected DVRs.
USING THE REMOTE SOFTWARE
SETTING THE TIME AND DATE
1. Exit to Windows by clicking EXIT on the Main Display screen and selecting Restart in Windows Mode. See the
Display Screen section later in this chapter.
2. Open Windows Explorer. Do this by right-clicking on the My Computer Icon (located on the top left hand corner of the
Desktop) and select Explore.
3. Click on Control Panel to open it. If you do not see Control Panel listed, Click My Computer to expand the folder tree.
4. Double Click on Date and Time inside Control Panel.
5. Adjust the Date and Time.
6. When finished, close all open windows and restart the DVR unit. Do this by clicking the Start button (Located on the
lower left hand side of the Desktop) and selecting Shut Down.