OpenEye OE2-E480 - Manual (Page 56)

56
SETUP OVERVIEW
Setup Screen Overview
Ensure the tree is expanded on the left menu to display the Camera, Record and Sensor Setup options. Most of the setup
options are the same in both the remote software and in the E480 system. Click Apply after changing any settings.
Camera Setup
Camera Setup
The Camera Setup display allows the user to define camera names, power on and off cameras and define specific cameras as
hidden.
Title – Enter camera name, up to seven characters.
Enable – ON/OFF [Enable individual cameras]
Hidden – ON/OFF [ON will hide the camera from users who are not logged in or users who do not have the permissions to
view it]
PanTilt Setup
The PanTilt (PTZ) Setup display allows the user to define the appropriate protocol for connected cameras with PTZ capabilities.
Since setup varies between different PTZ cameras; refer to the instructions supplied by the camera’s manufacturer to complete
the configuration.
ID – 1 ~ 255 [Set the PTZ ID]
PROTOCOL – Select a PTZ protocol
Sequence Setup
The Sequence Setup display allows the user to set the parameters for:
Page Dwell Time – 1 ~ 100 seconds [Set the sequence interval time for full screen on Main Display]
Camera Dwell Time – 1 ~ 100 seconds [Set the sequence interval time for individual cameras on Main Display]
Channel – 1 ~ 16 / All [Select cameras to display in Main Display]