RGBLink DXP V1616 User Manual - Manual (Page 35)

DXP V1616 User Manual 35
How to call pre-set input and output
channel saving mode
1. Press button 【REC】on front panel;
2. Can select 25 modes from button【0】~【24】, for example,
choose button 【7】;
3. Press 【ENTER】 to confirm.
Note
【 O 】 is default for one-to-one
correspondence for input and output way.
That is input【1】 is corresponding to output
【
1】, input【2】is corresponding to output
【 2】
SAVE: 7