Sierra Video G.R.I.P. V3.1.0 - Manual (Page 13)

Sierra Video Systems
7
Router Setup
Starting for the first time
Double click on the GRIP icon. The program will start.
If the following message appears, and your PC cabling is correct, click on “Demo Mode”
and proceed to the Communications Setup section of this manual before continuing.
If the communications setups and serial cable wiring are correct, upon startup, this
Message Box may be displayed:
This message will only appear if the database in GRIP differs from the configuration of
the router.
This dialog box will be displayed for each level of the switching system.
*Warning; If you choose “NO”, the GRIP database will not reflect
the current configuration of your router!
Only select “NO” if you are sure that your router is incorrectly
configured. Proceed to the “Utilities” section to configure your
router. Do not attempt to re-configure your router without
factory assistance.
Chapter
3