Sierra Video G.R.I.P. V3.1.0 - Manual (Page 33)

GRIP 3.1.0
27
Place a check in the box of the sync channel you want to set:
or
The screen will change to the following:
Using the faders, the sync termination can be changed to 75ohms or 510ohms.
“Poll Router” polls the router for current settings.
“Transmit to router” will send your settings to the router.
“Save to Database” stores your settings in the GRIP database only.
“Get from Database” will retrieve the settings stored in the database.
“Set At Unity Gain” has no function in the “delay” mode.