SIGMA SD1 - Manual (Page 108)

107
DPOF (DIGITAL PRINT ORDER FORMAT)
When printing images at a photo lab, it is possible to specify which photos
and quantity to print in advance, using the DPOF menu. This is also
available when making prints using a DPOF compatible printer.
WARNING !!
•
In the case of RAW images (files with X3F extension), DPOF printing is not
possible.
1
Press the button to select [DPOF] in [ Playback Menu] (P.28) while
displaying an image.
2
Select the desired option using the or button.
( When ([Select / Quantity] or [ Select All Images] is selected, a confirmation
dialog will appear. Press the
button to continue the process or the
button to stop the process.)
DPOF MENU
Select / Quantity
Set the print quantity by pressing the buttons.
To set number of copies from multiple images,
select the image that you wish to print by pressing
the
buttons and then set the print quantity for
each image by pressing the buttons. Press the
button to apply the setting.
Select All Images
This option selects all still images on the card for
printing. Set print quantity by pressing the
buttons and press the button to apply the
setting.
Cancel All Selections
Reset all print quantity settings. Press the
button to cancel all print quantity settings.
TIP
•
Total number of print quantity (the total sum of print quantity for each image)
is displayed at the lower right of the monitor.