SIGMA SD1 - Manual (Page 40)

39
INSERTING AND REMOVING THE CARD
The SD1 camera uses a CompactFlash™ (CF) card (Type1) to store the
data. Type II CompactFlash™ and hard disk type cards cannot be used.
TO INSERT THE CARD
1
Set the D-dial to the position.
2
Open the CF card cover, as shown in the
illustration.
3
Position the CF card with the label facing
toward the CF card cover and insert the CF
card smoothly, in the direction of the arrow,
as far as it can go into the slot.
z
The eject button will pop out slightly.
4
Close the CF card cover and slide it in the
direction shown by the arrow, until it clicks
shut
TIP
•
It may be necessary to format the card before use. (See P.41)
•
Ultra DMA (UDMA) or high-speed CF cards are recommended.