Af point selection – SIGMA SD1 User Manual
Page 58
57
AF POINT SELECTION
The SD1 is equipped with 11 focusing
points. Selecting the AF point can be
done automatically or manually by the
photographer.
Press
button and select the desired AF
point by rotating the A-dial (
) displayed in
the viewfinder.
z
The Selected AF point will be illuminated
in red in the viewfinder.
z
Automatic AF point selection can be
achieved when all focusing points in the
viewfinder are illuminated in red.
z
When you rotate the A-dial (
) clockwise, the selection will occur in the
looping sequence that follows.
AF points can be selected in the Function Display as well (P.35). By pressing the
button, the Function Display will be displayed. Select the desired AF point
by using the
buttons.
z
It is possible to move the AF area to up or down direction by using the
buttons and move to right or left direction by using the
buttons.
z
If you press the same direction on the 4-way controller several times, it will
change to Automatic AF Selection mode. After that, if you press any button of
the 4-way controller, it will return to Manual AF Selection mode.
Automatic AF Selection mode
(All AF points will be illuminated.)