SIGMA SD1 User Manual
Page 41
40
TO REMOVE THE CARD
1
Set the D-dial to the
position.
• Make sure that the CF card busy light is off,
before continuing.
2
Slide the CF card cover until it pops open.
3
Press the Eject button to eject the CF card.
4
Close CF card cover and slide it in the
direction shown by the arrow until it clicks
shut
CAUTION !!
•
Never do any of the following while the Busy Lamp is on. (The Busy Lamp
indicates when the camera is writing, reading, or erasing images from the
card. Doing any of the following may cause the image data to be lost or
damaged.)
1.
Do not remove the card.
2.
Do not remove the battery.
3.
Do not apply shock or vibrations to the camera.
TIP
•
If the camera is turned off while the Busy Lamp is on, the camera will remain
on until it has finished accessing the card.