Magnified images in image info screen – SIGMA SD1 User Manual
Page 93
92
*3
In AF mode, the AF point which was used to achieve focusing will be illuminated
in red. If the picture was taken without focusing, the AF points will not be
illuminated in red.
In MF mode, if the picture was taken with a focus indicator lit, that AF point will be
illuminated in red. If the picture was taken while no focus indicators were lit, no
AF points will be illuminated in red.
While in Image Info Screen:
z
Use A-dial (
), to change the image selection the same way as in
Single-Image View.
z
Use
buttons to change the image selection the same way as in
Single-Image View. (See next section for the exception.)
z
Press
again to close the Image Info Screen and return to the previous
view.
z
Press
button to turn off the color LCD monitor.
MAGNIFIED IMAGES IN IMAGE INFO SCREEN
While the Image Info Screen is displayed,
it is possible to magnify the image by
rotating the S-dial (
) to the
direction. It is possible to obtain detailed
histogram information for a particular
section of an image.
z
For more information on the histogram see
the next section.
While magnifying the image in the Image Info Screen:
z
Press the
buttons to pan to another part of the image. (Histogram will
update automatically to reflect the new values.)
z
Rotate the S-dial (
) to the
position to increase magnification.
z
Rotate the S-dial (
) to the
position to decrease magnification.
z
Press
to cancel magnification and view the Image Info Screen for full
image. (Press
again to disable the color LCD monitor.)