Navigating the signware-pro client – Smart Avi SignWare-Pro User Manual
Page 10
Advertising
10
4. Navigating the SignWare-Pro Client
1. Once you’ve logged in, connect the keyboard and press CTRL+ALT+2 to open the
SignWare-Pro Configuration Panel (Figure 4.1).
(Figure 4.1)
(Figure 4.2)
2. Network
Settings i.
DHCP
• Check this box if you would like your SignWare-Pro Client to receive an IP
Address from your network.
• If you need to set a Static IP, uncheck this box to manually set your IP, Netmask,
Advertising