Smart Avi SignWare-Pro - Manual (Page 9)

9
3. Setting up the SignWare-Pro Client
1. Setting up the SignWare-Pro Client
a. Connect the power supply cable to the SignWare-Pro client and plug the cable into a
grounded power outlet. (Figure 3.1)
b. Attach the HDMI from the monitor or display to the HDMI port on back of the client.
c. Connect the SignWare-Pro client to a router using CAT5 cable. (If you will be using a
wireless router, please refer to your router’s manual for additional information).
Turn on the display connected to the client.
The monitor should display the SignWare-Pro splash screen.
Once the kernel has booted, you will be brought to a black screen with a blue status bar at the
bottom.
Figure 3.1