Q-See QSF2648016 - Manual (Page 42)

User Manual for Commercial Series Net DVR
Page
42 Total 121
“Confirm” to shut down DVR. Otherwise, the user can not shut down DVR.
If DVR is shut down correctly, the
【POWER】lamp is on red.
Note: When message of “Shut down…” has appeared, please do not press
【POWER】key any
more, otherwise, DVR can not be shut down.
Abnormally Shutting down DVR
Using the power switch on rear panel
When DVR is running, if you switch off the power, the HDD in DVR may be damaged.
Please avoid such operation.
Taking away the power cable
Please avoid taking away the power cable directly.
Note: In some cases, when the power supply is abnormal, DVR will be damaged. We suggest
that you use recommended power supplies.