Q-See QSF2648016 - Manual (Page 50)

User Manual for Commercial Series Net DVR
Page
50 Total 121
Move “Active Frame” to “User” icon, press
【ENTER】key to enter into “User Management”
menu.
In the user name list box, only “admin” exists. You can use
【→】key, move “Active Frame” to
password edit box, and press
【EDIT】key to enter into edit status. Press numeric keys to input the
new password. The password is a combination of 16 numerals at most. After you finish inputting
password, press
【ENTER】key to exit. Move “Active Frame” to “Verify password” edit box, input
the new password. Move “Active Frame” to “Confirm” button, and press
【ENTER】, if new
password and verified new password are the same, the password will be saved and take effect.
If password and verified password are not same, a warning message box will open.
In this case, press
【ENTER】to return to password edit box, and input new password again.