Chapter 7utilities, 1save parameters, 2restore parameters – Q-See QSF2648016 User Manual
Page 97: Chapter 7 utilities, 1 save parameters, 2 restore parameters
Advertising
User Manual for Commercial Series Net DVR
Page
97
Total
121
Chapter 7 Utilities
There are many tools in “Utilities” menu. Including “SavePara”, “RestorePara”, “Upgrade”,
“Hard Disk”, “Stop Alarm Out”, “Reboot”, “Power Off”, “View Log” and “System Info”.
Enter into “Utilities” menu:
7.1 Save Parameters
Save factory default parameters into FLASH memory. You can reboot DVR to make them
effective.
7.2 Restore Parameters
Restore factory parameters for DVR. The IP address, gateway and port number will not be
changed back to defaults.
Advertising
This manual is related to the following products: