Q-See QSF2648016 - Manual (Page 65)

User Manual for Commercial Series Net DVR
Page
65 Total 121
Step 4: Setup alarm schedule: You can setup a working schedule. Only when the video loss
occurs during the schedule will the DVR respond.
Note: The 4 time periods can not be repeated. Please reboot the DVR to make parameters
effective.
Step 5: Setup alarm policy: You can select one or more response solutions, including “On
Screen Warning”, “Audible Warning”, “Upload to Center” and “Trigger Alarm Output”. You can
use
【↑】【↓】and 【EDIT】key to enable or disable them. “×” is disabled and “ü” is enabled.
Step 6: Save alarm setup: After your setup, press “Confirm” button and return to “Image
Setup” interface. In “Image Setup” menu, press “Confirm” button to save current camera
parameters and return to main menu.
Step 7: Save all cameras: If you want to setup other cameras, please repeat from step 2 to
step 6. In “Image Setup” menu, press “Confirm” key to save all cameras parameters. Press
“Cancel” button or
【ESC】key to abort.