Chapter 6parameters setup guide, 1administrator and password, Chapter 6 parameters setup guide – Q-See QSF2648016 User Manual
Page 49: 1 administrator and password
User Manual for Commercial Series Net DVR
Page
49
Total
121
Chapter 6 Parameters Setup Guide
Only the users that have “Parameters Setup” right need read this chapter. When the following
parameters are modified and saved, you must reboot the DVR to make the new parameters
effective. Other parameters do not need to reboot.
l Any network parameters
l Stream type, resolution and record schedule
l External alarm sensor type
l View tampering alarm schedule
l Video lost alarm schedule
l Motion detection alarm schedule
l External alarm schedule
l Alarm output schedule
l Transaction
l RS232 work mode
l Change video output standard
6.1 Administrator and Password
When the DVR leaves the factory, there is one default administrator. The name is “admin”
and password is “12345”. The name can not be changed, while the password can be.
Password modification
Press
【MENU】key, in the login dialog box, select the username “admin”, use【→】key, to
move cursor to password edit box, input “12345”, press “Confirm” to enter into administrator
menu.