4hard disk management, 5clear alarm out, 6reboot – Q-See QSF2648016 User Manual
Page 99: 7power off, 8view log, 4 hard disk management, 5 clear alarm out, 6 reboot, 7 power off, 8 view log
Advertising
User Manual for Commercial Series Net DVR
Page
99
Total
121
7.4 Hard Disk Management
Check HDD work status
Capacity, Free space, Stand by or not, Normal status or not.
Format HDD
Before formatting stop all recording. After formatting, you must reboot DVR, otherwise
DVR will not work normally.
7.5 Clear Alarm Out
Clear the alarm output manually.
7.6 Reboot
Reboot DVR.
7.7 Power Off
Shut down DVR.
7.8 View Log
To view the log recorded in DVR HDD.
In “Utilities” menu, press “View Log” to enter into “Log” menu:
Advertising
This manual is related to the following products: