Teac NP-H750 - Manual (Page 10)

10 10
Connecting speakers (2)
Connecting speakers using banana plugs
You can also connect speakers using commercially available
banana plugs. Connect the speaker cable to the banana
plug first, and then insert the plug into the terminal.
p Carefully read the instructions of the banana plugs that
you intend to use with this unit.
p For North American customers
Before inserting banana plugs, remove the black cap
from the top of each terminal cap.
For European customers
In accordance with European safety regulations, it is not
possible to connect banana plugs into the speaker termi-
nals on European models. The holes into which banana
plugs are inserted have been covered with black caps.
Connect the speakers using spades or bare wires. If the
black caps become separated from the terminals, return
them to their original position.
B
SUBWOOFER OUT jack
You can connect a subwoofer to enhance low fre-
quencies here.
Connect a commercially available powered subwoofer
to this u nit using a commercially available RCA cable.
p Use a subwoofer with a built-in amplifier. In
order to balance the levels with the main
speakers, adjust the subwoofer volume while
listening to audio that you know well. Adjust
it as you like to suit the music.
Using an iPod/iPhone/iPad
Compatible iPod/iPhone/iPad models
This unit can be connected to and used with the following
iPod/iPhone/iPad models.
iPod nano ( 2nd, 3rd, 4th, 5th, and 6th generation)
iPod touch (1st, 2nd, 3rd, and 4th generation)
iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G
iPad 2, iPad
p To connect an iPod/iPhone/iPad, use the USB cable sup-
plied with the iPod/iPhone/iPad.
iPod/iPhone/iPad software
If the unit or remote control buttons do not work properly
with your iPod/iPhone/iPad, updating its software might
solve the problem.
Download the latest software for your iPod/iPhone/iPad
from the following Apple website.
http://www.apple.com/downloads/