Teac NP-H750 - Manual (Page 50)

50 50
Sleep Timer
Using the sleep timer, you can put the unit in standby after
a specified amount of time.
Press the SLEEP button repeatedly until the desired setting
appears on the display.
The settings for the time until the unit enters standby
change as follows.
Enter standby
after 90 minutes
Enter standby
after 80 minutes
(More options
in 10-minute steps)
SLEEP 90
SLEEP 80
Enter standby
after 10 minutes SLEEP 10
Set the sleep timer setting
to OFF SLEEP OFF
・
・
・
・
p The display will be dimmed when you set the sleep
timer.
p After setting the sleep timer, press the SLEEP button
once to show for three seconds the amount of time
until the unit enters standby.
p When the sleep timer setting is set to OFF, dimming of
the display also stops.
Setting the wake-up timer (1)
You can set the wake-up timer to start playback at a set
time.
p Adjust the clock before setting the timer (page 23).
Setting the time of the timer
1
Press the TIME SET button repeatedly until
“On Time” is displayed.
The “hour” value blinks.
2
Press the scroll buttons (k/j) to set the
hour value, and press the ENTER button.
e
The “minute” value blinks.
p If you do not do anything for 30 or more seconds,
the unit will exit timer setting mode automatically.
p To exit timer setting mode, press the stop (8) button.