Teac NP-H750 - Manual (Page 23)

23 23
ENGLISH
p Press the TIME SET button repeatedly to cycle through
the following menu items. The items other than Current
Time are used to set the alarm clock (page 50).
Current Time
On Time
Off Time
Source Select
Status
p For Europe, the unit uses the 24-hour “military” clock.
For North America, the unit uses the 12-hour clock.
p Press the stop button (H) to cancel the time setting.
p When no action is taken for 30 seconds, the clock
setting mode will be cancelled.
3
Press the scroll buttons (k/j) to set the
current hour and press the ENTER button.
e
The “minute” value blinks.
p You can also use the MULTI JOG knob and ENTER
button on the main unit in the same way.
Set the current time before using the unit.
p If the power cord is disconnected from the outlet, the
set time will be reset to the default.
1
Press the STANDBY/ON button to turn the
unit on.
The indicator above the STANDBY/ON button lights
blue.
2
Press the TIME SET button.
“Current Time” appears and the hour value blinks.
Setting the current time (1)
Continued on the next page e