Playback – Teac K-01 User Manual

Page 14

Advertising
background image

14

1

3

5

4

2

1

Press the STANDBY/ON button to turn the unit on.

The indicator ring lights in blue.

< When an external input (COAX in, OPT in, USB in) is selected,

pressing the MODE button returns you to the SACD/CD mode.

2

Press the OPEN/CLOSE button to open the disc tray.

The tray opens toward you.

3

Set a disc with the printed label face up.

< Make sure the disc is clean, free from scratches, is not sticky, does

not have any “after market enhancements,” and is centered in the
tray. These precautions will help you to avoid any malfunction or
jamming of the tray or damage to the disc.

4

Press the OPEN/CLOSE button again to close the tray.

The tray will close.

Be careful not to let your fingers be pinched by the tray.

< Loading a disc takes a few seconds. Wait until the disc type

indicator, total number of tracks and total playing time of the
disc are displayed.

Playback

5

Press the PLAY button to start playback.

Playback starts from the first track on the disc.
During playback, the indicator ring of the PLAY button lights in
blue.

Suspending playback temporarily

(Pause mode)

Press the PAUSE button to pause playback.
The indicator ring of the PLAY button blinks.

Press the PLAY button or the PAUSE button to restart playback.

Stopping playback

During playback, press the STOP button to stop playback.

Opening and closing the disc tray

Press the OPEN/CLOSE button to open the tray.
Press the OPEN/CLOSE button again to close the tray.

< When the OPEN/CLOSE button is pressed during playback, it will

take a few seconds before the disc is unloaded and the tray opens.

Advertising
This manual is related to the following products: