Teac K-01 - Manual (Page 23)

English
23
Display Dimming
You can change the brightness of the display and indicators.
Press the DIMMER button to change the brightness.
Each time the DIMMER button is pressed, the brightness changes
as follows:
3 full brightness
2
1
0 off
< In off mode, when you press a button, the illuminations turn
temporarily on for 3 seconds.
< When an error message is displayed or in the setup mode, the
illuminations turn on with full brightness.
Setting the display to darken automatically
Display: FLaOFF>***
< If the display is left ON with the same indication for a long time,
brightness irregularities can occur. For this reason, we recommend
that you enable automatic display darkening.
15m
If playback is stopped and no operation is conducted for
15 minutes, the display automatically turns off.
30m
If playback is stopped and no operation is conducted for
30 minutes, the display automatically turns off.
60m
If playback is stopped and no operation is conducted for
60 minutes, the display automatically turns off.
OFF
The display never darkens automatically.