Teac K-07 User Manual
Page 15
15
En
gl
is
h
J
Skip buttons (.//)
Press to skip to the previous or next track.
Press and hold for at least one second during playback to scan
forward/backward. Repeatedly press and hold for more than one
second to change the forward/backward scan speed to one of
three levels (see p. 18).
They are also used when in setting mode to change parameters
(see p. 24).
K
Stop button (H)
Press to stop playback (see p. 17).
L
Play/Pause button (y/J)
Press when stopped or paused to start playback (see p. 16).
Press during playback to pause (see p. 17).
M
VOLUME buttons (+/−)
Use these to adjust the volume (see p. 29).
These buttons can be used to control this unit only when the
attenuator setting is ON (see p. 26).
You can also use these to adjust the volume of an Esoteric amplifier.
N
MUTE button
Use to temporarily mute the output (see p. 29).
This button can be used to control this unit only when the atten-
uator setting is ON (see p. 26).
You can also use it to mute an Esoteric amplifier.
E
INPUT buttons (k/j)
F
SETUP button
M
VOLUME buttons (+/−)
N
MUTE button
These buttons can be used to control this unit only when the
attenuator setting is ON (see p. 26).
When OFF, they can only be used to control an Esoteric amplifier.
When using this unit with an Esoteric amplifier, set the attenuator
setting to OFF and use the amplifier itself to adjust the volume
and mute the sound.
A
STANDBY/ON button
This button is not used with this unit.
B
Number buttons
Use to select tracks.
C
REPEAT button
Use with repeat playback (see p. 19).
Press and hold to enter program mode (see p. 19).
D
PLAY AREA button
Press when stopped to change the Super Audio CD playback
area (see p. 17).
E
INPUT buttons (k/j)
When the disc is stopped, use these buttons to select disc play-
back or an external input source.
When set to an external input (COAX/OPT/USB), the unit can be
used as a D/A converter (see p. 24).
These buttons can be used to control this unit only when the
attenuator setting is ON (see p. 26).
You can also use these to change the input of an Esoteric amplifier.
F
SETUP button
Press to enter setting mode.
This has the same function as pressing and holding the MODE
button for 2 or more seconds (see p. 24).
This button can be used to control this unit only when the atten-
uator setting is ON (see p. 26).
You can also use this for the setting mode of an Esoteric amplifier.
G
DIMMER button
Use to adjust the brightness of the main unit's display (see p. 28).
H
OPEN/CLOSE button (L)
Press to open and close the disc tray (see p. 16).
I
DISPLAY button
During playback, press this button to change what is shown on
the display (see p. 21).