Remote control unit, Battery installation, Battery replacement – Teac K-07 User Manual

Page 9

Advertising
background image

9

En

gl

is

h

Remote control unit

The included remote control allows this unit to be operated from a
distance.

Point the remote control unit at the main unit’s remote sensor
within 23 feet/7 meters of the main unit.

Remote sensor

23 feet/7 m

o

Depending on the angle, reception might be difficult. Use the
remote control from directly in front of the unit as much as possible.

o

Even if the remote control unit is used within its effective range,
operation by remote control might be impossible if there are any
obstacles between the unit and the remote control.

o

If direct sunlight or strong artificial illumination shines on the
remote sensor, the remote control might not function.

o

If the remote control unit is operated near other devices that gen-
erate infrared rays, or if other remote controls that use infrared rays
are operated near the unit, this unit might operate incorrectly. The
other devices might also operate incorrectly.

Battery Installation

Remove the cover from the back of the remote control and insert
two AAA batteries with their ¥/^ oriented as shown in the case.
Replace the cover.

Battery Replacement

If the operating range required between the remote control unit and
main unit decreases, the batteries are exhausted. In this case, replace
the batteries with new ones.
For more information about collection of batteries, please contact
your local government, your waste disposal service or the point of
sale where you purchased the collection.

Advertising
This manual is related to the following products: